Chongchi Intelligent Technology (Hong Kong) Holding Co., Ltd

Products >> Access Control Series >> Card Reader

  • Smart identification helmet
  • Smart identification helmet
  • Smart identification helmet
  • Smart identification helmet
Smart identification helmet Smart identification helmet Smart identification helmet Smart identification helmet

Smart identification helmet

 product description

智能安全帽

      The frequent occurrence of coal mine accidents has made the country's requirements for coal mine safety more and more high. However, coal mines generally have difficulty in management of wells. It is difficult for uphole personnel to grasp the dynamic distribution and operation of underground personnel in a timely manner, especially when some key positions are out of control. It will bring serious safety hazards. Once an accident occurs, there is no reliable information for the rescue of underground personnel. The efficiency of rescue and disaster relief and safety rescue is low. In response to this situation, CIT SMART has launched the CIT-R55M, CIT-R10M, and CIT-R05M mine access control system. This system will play an important role in attendance, personnel positioning and human accident prevention and management of coal mine personnel.
    The mine access control system is mainly used in mines, tunnel construction, chemical plants, construction sites, nuclear power bases, field forces and other places. The mine card of the system can be fixed on the helmet worn by the mine personnel, or carried around, or placed on the vehicle, and the card number can be automatically recognized by the remote card reader, and the location and the latest record information can be uploaded to the control system. . The hardware of the mine access control system includes the hard hat mine card, the 2.4G long distance card, the 2.4G two-in-one long distance card and the mine remote card reader. The mine card is used to upload the corresponding personnel card number of the carrier. The mine remote reader is mainly used to record card reading information and upload the data to the control system. Support 2 sets of Weigand output, 2 sets of card reader enable input, 2 sets of door open relay output, 1 set of alarm relay output, RS485, RS232, TCP/IP multiple communication mode, support storage of 55,000 user cards and 220,000 records .
     System advantages:

1. The mine card design has beautiful appearance, firm structure, waterproof and moisture proof, and can be applied to different environments;

2, the flexibility is strong, the mine card reading distance is available in three distance modes: near, medium and far;

3, strong card reading ability, can carry out fast and accurate calculation;

4, the card reading distance is far, the card reading speed is fast;

5. The system uses high-frequency transmission signals, which are not affected by rain or snow weather;

6. The card adopts anti-collision design, and a special silicone protective cover is designed for the complex environment of mine construction, which can prevent damage to the card caused by impact and effectively improve the service life of the card.

7. The management personnel can keep track of the total number and distribution of underground personnel and mobile equipment; the system can track the situation of all personnel going down, each miner entering the well, the time of the well and the movement trajectory, so that the enterprise can carry out more reasonable dispatching and management.

8. The system can track the position of all personnel, further determine the location and quantity of personnel, carry out statistics on the number of people in the safe area, and take corresponding rescue measures in time to improve the efficiency of emergency rescue work.
 智能安全帽
R01

Technical Parameters:

Working voltage: DC3.3V (with a section of 2032 button battery power supply)

Average operating current: <10uA

Working temperature: -25 ° C to 75 ° C

Working humidity: 10%-90%

Operating frequency: 2.4GHz

Card reading ability: 1000 sheets / sec, no slowdown at 60 mph can read cards normally

Card reading speed: 0.5s-60s can be set

Communication interval: 0.5s-60s can be set

Card reading distance: near (0-5 meters), medium (0-20 meters), far (0-60 meters) three modes are available

Communication method: RS485: 1 group, TCP/IP: 1 group, Weigand26/34 card reader: 2 groups

Mine card appearance size: length 42mm × width 35mm × height 12mm

Mine card shell color: white shell, orange silicone cover

Mine card shell material: ABS, silicone

Mine card battery life: 2 years (card sending cycle is 0.5 seconds) to 10 years (card sending cycle is 30 seconds)

遠距離卡
R02


Technical Parameters:

Working voltage: DC3.3V (with two 2032 button battery power supply)

Average operating current: <20uA

Working temperature: -25 ° C to 75 ° C

Working humidity: 10%-90%

Working frequency: 2.4GHz

Card reading ability: 1000 sheets / sec, no slowdown at 60 mph can read cards normally

Card reading speed: 0.5 seconds, 60 seconds can be set

Communication interval: 0.5 seconds, 60 seconds can be set

Card reading distance: near (0-30 meters), medium (0-80 meters), far (0-180 meters) three modes are optional

Communication method: RS485: 1 group, TCP / IP: 1 group, Weigand26 / 34 card reader: 2 groups

Card size: length × 85 mm width 55 mm × height 7 mm

Mine card shell color: white shell

Mine card shell material: ABS

Mine card battery life: 2 years (card sending cycle is 0.5 seconds) to 10 years (card sending cycle is 30 seconds)

遠距離卡
R03

Technical Parameters:

Working voltage: DC3.3V (powered by built-in lithium ion battery)

Average operating current: <20uA

Working temperature: -25 ° C to 75 ° C

Working humidity: 10%-90%

Operating frequency: 2.4GHz

Card reading ability: 1000 sheets / sec, no slowdown at 60 mph can read cards normally

Card reading speed: 0.5s-60s can be set

Communication interval: 0.5s-60s can be set

Card reading distance: near (0-30 meters), medium (0-80 meters), far (0-180 meters) three modes are available

Communication method: RS485: 1 group, TCP/IP: 1 group, Weigand26/34 card reader: 2 groups

Card size: length 85mm × width 55mm × height 5mm

Mine card shell color: white shell

Mine card shell material: ABS

Mine card battery life: 2 years (card sending cycle is 0.5 seconds) to 10 years (card sending cycle is 30 seconds)


usage notice:

1. When the mine card is installed on the mine helmet, pay attention to the hole according to the installation hole map to ensure the stability of the mine card and the helmet.

2. The sleep period of the mine card is set according to the usage environment and the scene. Generally, the typical sleep period is 3 to 5 seconds.

3. The life of the mine card battery expires. To replace the battery, you need to replace the battery according to the standard operating procedures to prevent the card from being damaged due to improper removal.

4. Pay attention to lightning protection when installing.

5. The card reader should avoid working in the environment near high voltage.

6, the power supply should use a regulated DC12V power supply.

7, the power supply should ensure DC12V 1A or more current, to ensure the power required by the card reader.

8, should avoid similar equipment, similar equipment will interfere with each other.

9. The card cannot be wrapped in metal, and the metal will block the card reading.

10. The battery life of the card is determined by the card sending cycle. The longer the cycle, the longer the battery life. Please adjust the sending cycle according to actual needs.


Use place:

For coal, metal mining and other mines, tunnel construction, chemical plants, construction sites, nuclear power sites, field forces and other places.



Remote reading system structure diagram: